• 812-768-5678 |
  • orders@brettscarcare.com

Keyword Search


Select a Vehicle

Brand

  • Crown Automotive
  • Edelbrock
  • Holley Performance
  • Jet Performance
  • Quick Fuel Technology

Barrel

  • One
  • Two
  • Four
  • OEM

CFM

  • OEM
  • 300
  • 325
  • 350
  • 390
  • 450
  • 465
  • 470
  • 500
  • 570
  • 580
  • 600
  • 650
  • 670
  • 680
  • 700
  • 735
  • 750
  • 770
  • 780
  • 800
  • 830
  • 850
  • 870
  • 880
  • 950
  • 975
  • 1000
  • 1050
  • 1150
  • 1250
  • 1350
  • 1400
  • 1425
  • 1450
  • 1475

Choke

  • Divorced
  • Electric
  • Electrical
  • Hot Air
  • Manual
  • None
  • OEM
  • Remote

Emission

  • With EGR
  • Without EGR
  • OEM
  • N/A

Finish

  • Zinc
  • Cast
  • Dichromate Gold
  • Shiny w/ Chrome Fuel Bowls
  • Polished
  • Anodized
  • OEM
  • Satin
  • Ball Burnished
  • Black
  • Dichromate
  • Gold Dichromate
  • Gray
  • Hard Core Gray
  • Iridited Marine
  • Polished Aluminum
  • Powder Coat Chrome
  • Shiny
  • Endurashine™

Flange

  • Spread Bore
  • Square Bore
  • Q-Jet
  • OEM
  • 2bbl/2300
  • 4500

Primary Power Valve

  • 10.5
  • 2.5
  • 25-45
  • 3.5
  • 35
  • 4.5
  • 45
  • 5.0
  • 5.5
  • 6.0
  • 6.5
  • 60
  • 65
  • 8.5
  • N/A

Throttle Bore

  • 1.375 in.
  • 1.437 in.
  • 1.438 in.
  • 1.562 in.
  • 1.563 in.
  • 1.688 in.
  • 2.350 in.
  • 2.375 in.
  • 1.750 in.
  • 2.250 in.
  • 1.500 in.
  • 1.5625 in.
  • 1.6875 in.
  • 2.000 in.
  • 2.125 in.

Type

  • Mechanical
  • Street
  • Universal
  • NA
  • Single
  • OEM
  • Automatic
  • 4150
  • Automotive
  • Marine

Usage

  • Circle Track
  • Marine
  • OEM
  • Off-Road
  • Racing
  • Racing/Circle Track
  • Street
  • Street/Hi-Performance
  • Street/Strip

Carburetor

Holley Performance 

Aluminum Double Pumper Carburetor

4 Parts

Aluminum Double Pumper Carburetor
  • Aluminum Design For 38% Weight Savings
  • Improved Fuel Bowl Design
  • Tumble Polished Shiny Finish For Good Looks
  • Optimized Street/Strip Calibration That Works Out Of The Box
  • Manual Choke For Precise Cold Start Control
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Edelbrock 

AVS2 Series Carburetor

2 Parts

AVS2 Series Carburetor
  • AVS2 Series Carburetor

See All

Edelbrock 

AVS2 Series™ Carburetor

20 Parts

AVS2 Series™ Carburetor
  • Designed and Calibrated For Optimum Street Performance
  • Features Annular Flow Primary Boosters
  • Timed And Full Vacuum Ports For Ignition Advance
  • Delivers Improved Fuel Atomization To Eliminate Flat Spots
  • Improved Flow Metering Make It Ideal For Small/Big Block Engines
  • For Single Or Dual Plane Intake Manifolds

See All

Quick Fuel Technology 

Brawler® Diecast Carburetor

11 Parts

Brawler® Diecast Carburetor
  • Latest Technology In Air/Fuel Calibrations
  • For Street Or Race Engine Demands
  • Vacuum And Mechanical Secondary Versions
  • Dual Inlet Fuel Bowls
  • Sight Glass Windows For Easy Float Adj.
  • Changeable Idle And High Speed Air Bleeds
  • Four-Corner Idle Adjustment
  • Street/Racing Models Incl. Billet Metering Blocks/Throttle Bodies
  • Precision Throttle Shafts To Ensure Long Term Performance

See All

Quick Fuel Technology 

Brawler® Race Carburetor

14 Parts

Brawler® Race Carburetor
  • The Latest In Technology In Air/Fuel Calibrations
  • For Street Or Race Engine Demands
  • Available In Both Vacuum/Mechanical Secondary Versions
  • All Models Have Dual Inlet Fuel Bowls
  • With Sight Glass Windows For Safe/Easy Float Adjustments
  • Changeable Idle/High Speed Air Bleeds For Easy Tuning
  • Four-Corner Idle Adjustment on Mechanical Secondary Models
  • Performance Models Incl. Billet Metering Blocks/Throttle Bodies
  • With Precision Throttle Shafts To Ensure Long Term Performance
  • Shiny Finish w/Purple Billet Metering Blocks/Throttle Body

See All

Quick Fuel Technology 

Brawler® Street Carburetor

15 Parts

Brawler® Street Carburetor
  • The Latest In Technology In Air/Fuel Calibrations
  • For Street Or Race Engine Demands
  • Available In Both Vacuum/Mechanical Secondary Versions
  • All Models Have Dual Inlet Fuel Bowls
  • With Sight Glass Windows For Safe/Easy Float Adjustments
  • Changeable Idle/High Speed Air Bleeds For Easy Tuning
  • Four-Corner Idle Adjustment on Mechanical Secondary Models
  • Performance Models Incl. Billet Metering Blocks/Throttle Bodies
  • With Precision Throttle Shafts To Ensure Long Term Performance

See All

Crown Automotive 

Carburetor

8 Parts

Carburetor
  • Carburetor

See All

Jet Performance 

Circle Track Quadrajet Carburetor

1 Parts

Circle Track Quadrajet Carburetor
  • Built Exclusively For Circle Track Racing
  • Extensively Reworked
  • Increased Main Well Size
  • Balanced To Assure High RPM Fuel Flow
  • Several Circuit Modifications

See All

Holley Performance 

Classic Double Pumper Carburetor

2 Parts

Classic Double Pumper Carburetor
  • Classic Zinc Finish For Corrosion Resistance/Classic Holley Look
  • Optimized Street/Strip Calibration That Works Out Of The Box
  • Electric Choke For Precise Cold Start Control
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • Dual Accelerator Pumps For Add Fuel Under Initial Acceleration
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run

See All

Holley Performance 

Classic Street Carburetor

8 Parts

Classic Street Carburetor
  • Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
  • Performance Upgrade For Stock To Mildly Modified Vehicles
  • Universal Calibration For Easy Bolt-On Performance
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • Vacuum Secondaries For Use On Wide Variety Of Vehicles
  • Single Feed Fuel Inlet For Easy Installation
  • Power Valve Blow Out Protection
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
  • Compensates For All Vehicle Weights Gearing/Transmissions

See All

Holley Performance 

Competition Double Pumper® Race Carburetor

3 Parts

Competition Double Pumper® Race Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Optimized Competition Fuel Curve Provides Reliable Horsepower
  • No Choke For Maximum Airflow
  • Annular Style Booster For Superior Throttle Response
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Holley Performance 

Dominator Carburetor

8 Parts

Dominator Carburetor
  • Gold Dichromate Finish On Fuel Bowls For Corrosion Resistance
  • Race Only Calibration
  • Contoured Venturi Inlet Balances Airflow For Increased hp
  • Annular Booster Deliver Excellent Signal and Throttle Response
  • Screw In Air Bleeds Offer Precision Tuning Capabilities
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • One Piece Off-Road Vent Tube Eliminates Fuel Spillover
  • Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
  • Dual Fuel Inlets For Constant High Volume Fuel Delivery
  • Fuel Bowl Can Be Plumbed From Either Side For Ease Of Install
  • Includes Notched Float and Jet Extensions
  • 100% Wet Flow Tested By Holley Technicians

See All

Jet Performance 

Dominator Stage 2 Carburetor

2 Parts

Dominator Stage 2 Carburetor
  • Includes Stage 1 Modifications
  • Metering Blocks Are Fully Modified
  • Removable Air Bleeds Are Installed
  • Modified Floats And High Flow Needle
  • Air Flow Remains Unchanged From Stock Rating

See All

Jet Performance 

Dominator Stage 3 Carburetor

2 Parts

Dominator Stage 3 Carburetor
  • Includes Stage 1 And Stage 2 Modifications
  • Increased Venturi Diameter
  • Radiused And Modified Throttle Shafts
  • Annular Discharge Boosters Are Modified
  • Increased Signal Strength And Fuel Atomization
  • Promotes Better Fuel Distribution
  • Intended For Pro Street/Super Gas/Super Comp Vehicles

See All

Jet Performance 

Dominator Stage 4 Carburetor

2 Parts

Dominator Stage 4 Carburetor
  • Secret Weapon Of Many Pro Racers
  • Not A Modified Stock Booster
  • Signal Strength And Atomization Characteristics
  • Available With Oversized Butterflies

See All

Holley Performance 

Double Pumper Carburetor

12 Parts

Double Pumper Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Optimized Street/Strip Calibration That Works Out Of The Box
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • Dual Accelerator Pumps For Add Fuel Under Initial Acceleration
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet Flow Tested By Holley Technicians

See All

  • Quality-Built
  • Unaffected By Engine Backfires
  • Easily Tunable

See All

  • Unaffected By Engine Backfires
  • It Can Be Easily Adjusted

See All

  • Unaffected By Engine Backfires
  • It Can Be Easily Adjusted
  • No Extra Parts Required To Achieve Optimum Performance

See All

Holley Performance 

Factory Muscle Car Carburetor

2 Parts

Factory Muscle Car Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • 350 CFM Model 2300 Center Carburetor
  • Fuel Inlets For Original Factory Fuel Lines
  • Original List Number Stamped With Current Date Code
  • Remote Choke For Easy Hook Up Original Vehicle
  • Factory Style Metal Throttle Linkage
  • All OE Vacuum Hook-Ups
  • 100% Wet Flow Tested By Holley Technicians

See All

Holley Performance 

Gen 3 Marine Ultra Dominator Carburetor

1 Parts

Gen 3 Marine Ultra Dominator Carburetor
  • All Aluminum Construction Saves 3.8 lbs. Over Original Models
  • 28% Weight Savings
  • Designed For Marine High HP Engines
  • Fully Machined From Venturi Throat To Throttle Bore
  • Integrated Idle Bypass Valve Allows For Adjustment Of Idle
  • 12 Hole Billet Booster Superior Atomization/Throttle Response
  • Metering Blocks Feature Improved True Gasket Sealing
  • Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
  • Drain Plug On Bowl Provides Easy Access To Empty Bowl
  • Contoured Hex Head Squirter Screws For Streamlined Airflow

See All

Holley Performance 

Gen 3 Ultra Dominator® HP Race Carburetor

46 Parts

Gen 3 Ultra Dominator® HP Race Carburetor
  • All Aluminum Construction Saves 3.8 lbs. Over Original Models
  • 28% Weight Savings
  • Calibrations For Todays Larger Race Engines and New Fuels
  • Fully Machined From Venturi Throat To Throttle Bore
  • Integrated Idle Bypass Valve Allows For Adjustment Of Idle
  • 12 Hole Billet Booster Superior Atomization/Throttle Response
  • Metering Blocks Feature Improved True Gasket Sealing
  • Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
  • Drain Plug On Bowl Provides Easy Access To Empty Bowl
  • Contoured Hex Head Squirter Screws For Streamlined Airflow

See All

Holley Performance 

Gen 3 Ultra Dominator® SP Carburetor

3 Parts

Gen 3 Ultra Dominator® SP Carburetor
  • All Aluminum Construction Saves 3.8 lbs. Over Original Models
  • 28% Weight Savings
  • Shiny With Billet Aluminum Metering Block and Black Hardware
  • Calibrations Optimized For Todays Race Engines and New Fuels
  • Fully Machined From Venturi Throat To Throttle Bore For Perf
  • Annular Booster Deliver Excellent Signal and Throttle Response
  • Screw In Air Bleeds Offer Precise Tuning Capabilities
  • Metering Blocks Feature Improved True Gasket Sealing
  • Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • Clear Sight Windows On Fuel Inlet Side For Fuel Level Adjustment
  • Notched Float and Jet Extension Are Factory Installed

See All

Jet Performance 

Holley® Dominator Stage 1 Carburetor

2 Parts

Holley® Dominator Stage 1 Carburetor
  • Proper Sizing Of The Idle/Transition/Acceleration
  • Proper Sizing Of The Main Metering Circuits
  • Metering Blocks Checked For Straightness
  • Boosters Are Aligned In the Venturi
  • Throttle Bores Are Aligned For Proper Seating
  • Using The Highest Quality Parts

See All

Jet Performance 

Holley® Stage 1 Carburetor

7 Parts

Holley® Stage 1 Carburetor
  • Proper Sizing Of The Idle/Transition/Acceleration
  • Proper Sizing Of The Main Metering Circuits
  • Metering Blocks Checked For Straightness
  • Boosters Are Aligned In the Venturi
  • Throttle Bores Are Aligned For Proper Seating
  • Using The Highest Quality Parts

See All

Jet Performance 

Holley® Stage 2 Carburetor

7 Parts

Holley® Stage 2 Carburetor
  • All The Modifications Of Stage 1
  • Fuel Metering Circuits Are Inspected
  • Air Horn Is Milled To Improve/Equalize Air Flow
  • Quick Change Cover Kit Is Optional

See All

Jet Performance 

Holley® Stage 3 Carburetor

7 Parts

Holley® Stage 3 Carburetor
  • All The Modifications Of A Stage 1 And 2
  • Intended For Pro-Street Racing Applications
  • Modified Venturis/Increased Air Flow
  • Modified Discharge Boosters And Metering Blocks
  • Increased Signal Strength And Fuel Atomization
  • Machined Throttle Shafts
  • Four Corner Idle Circuits/Modified Floats
  • High Flow Needle And Seats

See All

Jet Performance 

Holley® Stage 4 Carburetor

3 Parts

Holley® Stage 4 Carburetor
  • Full Race Carb
  • Air Horn Apparatus Completely Removed
  • Center Section Is Hand Radiused To Achieve Max. Allowable Airflow
  • Removable Air Bleeds Installed For Ultimate In Tuning Cab.

See All

Jet Performance 

Holley® Stage 4 Series Carburetor

2 Parts

Holley® Stage 4 Series Carburetor
  • Throttle Shafts Are Trimmed
  • Ultimate Airflow From A Standard Flange Carburetor
  • Metering Blocks Are Fully Blueprinted
  • Balancing Main Well Volumes
  • Optimizing The Emulsion System
  • Idle Circuit Calibration
  • Ultimate Fuel Curve And Fuel Atomization

See All

  • Proper Sizing Of The Idle/Transition/Acceleration
  • Proper Sizing Of The Main Metering Circuits
  • Metering Blocks Checked For Straightness
  • Boosters Are Aligned In the Venturi
  • Throttle Bores Are Aligned For Proper Seating
  • Using The Highest Quality Parts

See All

  • Includes Stage 1 Modifications
  • Metering Blocks Are Fully Modified
  • Removable Air Bleeds Are Installed
  • Modified Floats And High Flow Needle
  • Air Flow Remains Unchanged From Stock Rating

See All

  • Includes Stage 1 And Stage 2 Modifications
  • Increased Venturi Diameter
  • Radiused And Modified Throttle Shafts
  • Annular Discharge Boosters Are Modified
  • Increased Signal Strength And Fuel Atomization
  • Promotes Better Fuel Distribution
  • Intended For Pro Street/Super Gas/Super Comp Veh.

See All

  • Secret Weapon Of Many Pro Racers
  • Not A Modified Stock Booster
  • Signal Strength And Atomization Characteristics
  • Available With Oversized Butterflies

See All

Quick Fuel Technology 

Hot Rod Series Carburetor

9 Parts

Hot Rod Series Carburetor
  • Features A Fully Adjustable Electric Choke For Easy Starting
  • Dual Metering Block w/Four Corner Idle
  • Smooth and Efficient Idle Quality
  • Screw-In Air Bleeds/Idle Feed Restrictions
  • For Quick And Unsurpassed Tuning Capability
  • Universal Throttle Level w/Sealed Throttle Shafts
  • Tunable Secondary Opening Rate
  • Tumble Polished For Long Lasting Shine

See All

Holley Performance 

HP™ Classic Race Carburetor

12 Parts

HP™ Classic Race Carburetor
  • Gold Dichromate Finish For Corrosion Resistance
  • Optimized Race Calibration
  • Contoured Venturi Inlet Balances Airflow For Increased hp
  • Screw In Air Bleeds For Precision Tuning Capabilities
  • Dual 30cc Accelerator Pumps
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • Progressive Secondaries For Perfect Off The Line Launches
  • Stainless Steel Throttle Plates
  • Includes Notched Float and Jet Extensions
  • Calibrated For Gasoline
  • 100% Wet Flow Tested By Holley Technicians

See All

Holley Performance 

Keith Dorton Series Carburetor

2 Parts

Keith Dorton Series Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Calibrated Specifically For Circle Track Use
  • No Choke For Unobstructed Airflow
  • 30CC Accelerator Pump For Add Fuel Under Initial Acceleration
  • Hp Metering Block For Improved Fuel Flow
  • Screw In Air Bleeds For Precision Tuning Capabilities
  • Welded Throttle Lever
  • Power Valve Blow-Out Protection
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Holley Performance 

Low-Rider Avenger Carburetor

1 Parts

Low-Rider Avenger Carburetor
  • Shiny Finish With Chrome Fuel Bowls
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Elec Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
  • Limited Lifetime Warranty Defects In Material/Workmanship
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Holley Performance 

Marine Avenger Carburetor

4 Parts

Marine Avenger Carburetor
  • Calibrated For Gasoline
  • Exceeds Coast Guard Standards/J1223 Marine Standard Certified
  • Dual Metering Block System w/Four Corner Idle Adjustment
  • Throttle Shafts Are Ptfe Coated For Corrosion Protection
  • Calibrated To Compensate For Unique Engine Loads Found On Boats
  • All Aluminum Construction
  • Hard Coat Gray Finish For Corrosion Protection In Marine Environs
  • Limited Lifetime Warranty

See All

Holley Performance 

Marine Carburetor

13 Parts

Marine Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Factory Preset Electric Choke For Easy Startups
  • Compensate For All Weights To Allow Smooth Opening Of Secondaries
  • 30CC Accelerator Pump For Smooth Starts
  • Single Feed Fuel Inlet For Easy Installation
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
  • Power Valve Blow-Out Protection
  • 100% Wet Flow Tested By Holley Technicians

See All

Holley Performance 

Marine Dominator Carburetor

1 Parts

Marine Dominator Carburetor
  • Gold Dichromate Finish On Fuel Bowls For Corrosion Resistance
  • Contoured Venturi Inlet Balances Airflow For Increased hp
  • Annular Booster Deliver Excellent Signal and Throttle Response
  • Screw In Air Bleeds Offer Precision Tuning Capabilities
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • Progressive Secondaries For Perfect Off The Line Launches
  • Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
  • Dual Fuel Inlets For Constant High Volume Fuel Delivery
  • Fuel Bowl Can Be Plumbed From Either Side For Ease Of Install
  • J-Style Vent Tubes
  • Includes Notched Float and Jet Extensions
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run

See All

Edelbrock 

Marine Series Carburetor

4 Parts

Marine Series Carburetor
  • Complies w/U.S. Coast Guard Safety Standards
  • Modified Bowl Venting For Marine Compliance
  • Specially Designed Throttle Shafts For Marine Use
  • Accelerator Pump Seal
  • 3/8 in. Inverted Flare Fuel Inlet Fitting
  • Tube In Airhorn For Fuel Pump Vent
  • 5 1/8 in. Flame Arrestor Flange
  • Universal Marine Throttle Lever
  • Revised Secondaries For Improved Transient Performance
  • Factory Set Float Levels/Adjustments Are Rarely Needed
  • Dependable Marine Performance/Smooth Throttle Response
  • Installation And Tuning DVD Included With Every New Carb

See All

Quick Fuel Technology 

Marine Series Carburetor

8 Parts

Marine Series Carburetor
  • Exclusive Black Diamond Coating For Enhanced Corrosion Protection
  • Coating Provides a 6% Reduction In Fuel Temperature
  • Electric Choke - Fully Adjustable One Wire Hookup
  • J Tubes To Prevent Spillage
  • PTFE-Coated Throttle Shafts w/PTFE Bearing Ribbons
  • Built In Sight Glass Windows For Easy Float Adjustment
  • Changeable Primary Idle Feed And Power Valve Channel Restrictions
  • Changeable Idle Air And High Speed Bleeds
  • QuickLink Secondary Adj. For Fast/Easy Changing Of Opening Rates

See All

Holley Performance 

OE Muscle Car Carburetor

5 Parts

OE Muscle Car Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • 350 CFM Model 2300 Center Carburetor
  • Fuel Inlets For Original Factory Fuel Lines
  • Original List Number Stamped With Current Date Code
  • Remote Choke For Easy Hook Up Original Vehicle
  • Factory Style Metal Throttle Linkage
  • All O.E. Vacuum Hook-Ups
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Holley Performance 

Off-Road Truck Avenger Carburetor

5 Parts

Off-Road Truck Avenger Carburetor
  • Gold Dichromate Finish For Extreme Off Road Environments
  • Single Feed Fuel Inlet For Ease Of Installation
  • Optimized Off-Road Calibration That Works Out-Of-The-Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • One Piece Off-Road Vent Tube Eliminates Fuel Spillover
  • Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
  • Limited Lifetime Warranty Defects In Material/Workmanship
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Quick Fuel Technology 

P Series Carburetor

3 Parts

P Series Carburetor
  • Screw-In Restrictions Throughout
  • 5-Stage Emulsion
  • Light-Weight Aluminum Construction
  • O-Ring AN Fuel Inlets
  • Slabbed And Sealed PTFE™ Coated Throttle Shafts
  • Wedge Floats For Consistent Fuel Level Control

See All

Holley Performance 

Performance Race Carburetor

1 Parts

Performance Race Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run

See All

Holley Performance 

Performance Street Carburetor

5 Parts

Performance Street Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
  • Power Valve Blow-Out Protection
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run

See All

Edelbrock 

Performer Series Carburetor

21 Parts

Performer Series Carburetor
  • Bolts On And Runs Right Out of The Box
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels; Adjustments Are Rarely Needed
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Compatible w/Dual-Quad Apps such as C-26/F-85/Street Tunnel Ram
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Made In The U.S.A.

See All

Edelbrock 

Performer Series EPS Carburetor

2 Parts

Performer Series EPS Carburetor
  • Bolts On And Runs Right Out of The Box
  • Dependable Street Performance/Smooth Throttle Response
  • Factory Set Float Levels; Adjustments Are Rarely Needed
  • High Capacity Accelerator Pump
  • Improved Primary And Secondary Cluster Design
  • 2-Piece Design Means No Gaskets Below The Fuel Level
  • Installation And Tuning DVD Included With Every New Carb
  • Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
  • Designed/Calibrated For Optimum Street Performance
  • Match With A Variety of Manifolds
  • Incl. Both Timed And Full Vacuum Ports For Ignition Advance
  • Made In The U.S.A.

See All

Quick Fuel Technology 

Pro Street QFX Series Carburetor

3 Parts

Pro Street QFX Series Carburetor
  • 2 Circuit Metering
  • Black Billet Metering Blocks
  • Power Valve Provision
  • Annular Boosters
  • QuickLink™ Secondary Adjustment
  • 4 Corner Idle System
  • Designed For Gasoline Use Only

See All

Quick Fuel Technology 

Q Series Carburetor

48 Parts

Q Series Carburetor
  • 1 11/16 in. Throttle Bore Size
  • 22-68 Primary Jet
  • 22-76 Secondary Jet
  • 26-73 Idle Bleed
  • 26-31 Hi Speed Bleed
  • 21-33 Pump Nozzle
  • 25-45 Power Valve
  • 18-2 Needle And Seat
  • Gas Fuel

See All

Quick Fuel Technology 

QFX Series Carburetor

17 Parts

QFX Series Carburetor
  • QFX Aluminum Main Body w/Raised Venturi
  • Billet Aluminum Metering Blocks w/Screw In Restrictions
  • Aluminum Fuel Bowls w/Dual Sight Windows/Fuel Inlets
  • Nitrophyl Floats and Jet Extensions
  • Viton 0.130 in. Needles and Seats
  • Billet Aluminum Annular Booster Inserts
  • QuickLink Adjustable Secondary Opening Adjustment
  • Hand Assembled and Engine Tested

See All

Jet Performance 

Quadrajet Marine Carburetor

8 Parts

Quadrajet Marine Carburetor
  • Comes w/Remote Electric Choke
  • Best Performing Carburetor For Your Boat
  • Remanufactured To Strictest Quality Standard

See All

Quick Fuel Technology 

Race Q Series Carburetor

7 Parts

Race Q Series Carburetor
  • Race Style Aluminum Main Body w/Upgraded Downleg Race Boosters
  • Screw-In Airbleeds Recessed and Moved Out Or AirWay
  • 5-Emulsion Billet Metering Blocks w/Screw-In Bleeds
  • Lightweight Aluminum Fuel Bowls w/Internal Baffles
  • 4 Corner Idle
  • Billet Throttle Body w/Roller-Bearing Sealed Shafts
  • Each Throttle Body Is Machined for Both 4150/4500 Style Manifolds

See All

Holley Performance 

Replacement Carburetor

4 Parts

Replacement Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Direct Emissions Legal Bolt On Replacement For Some Vehicles
  • Improves Performance Over Stock Carburetor
  • All Emissions Provisions
  • Factory Preset Electric Choke For Easy Startups
  • For All Weights/Gearing/Trans For Smooth Open Of Secondaries
  • Single Feed Fuel Inlet For Easy Installation
  • Power Valve Blow-Out Protection
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Jet Performance 

Rochester Circle Track 2G Carburetor

1 Parts

Rochester Circle Track 2G Carburetor
  • Small Diameter Float For Maximum Float Bowl Volume
  • Modified Based On Engine And Vehicle Specs
  • Modified Idle/Transition/Accelerator Pump
  • Using The Highest Quality Parts

See All

Jet Performance 

Rochester Marine Carburetor

3 Parts

Rochester Marine Carburetor
  • Best Performing Carburetor For Your Boat
  • Remanufactured To Strictest Quality Standard

See All

Jet Performance 

Rochester Quadrajet Carburetor

1 Parts

Rochester Quadrajet Carburetor
  • Carburetor Is Extensively Reworked
  • Increased Main Well Size
  • Balanced To Assure Top End High RPM Fuel Flow
  • Several Circuit Modifications
  • Keep Consistent Idle Quality

See All

Jet Performance 

Rochester Quadrajet Stage 1 Carburetor

6 Parts

Rochester Quadrajet Stage 1 Carburetor
  • Casting Plug Are Sealed With Epoxy
  • All Circuits Are Checked For Proper Sizing
  • Calibration Is Checked For Proper Jets
  • Check Primary And Secondary Metering Rods
  • Using The Highest Quality Parts
  • New Float/Choke Pull-Off
  • Bronze Bushed Throttle Shafts
  • Restore Factory Stock Performance

See All

Jet Performance 

Rochester Quadrajet Stage 2 Carburetor

7 Parts

Rochester Quadrajet Stage 2 Carburetor
  • All The Features Of Stage 1
  • Fully Recalibrated Idle/Off Idle/Main/Accel. Pump
  • High Speed Circuits To Match Any Modifications
  • Improved Idle Quality
  • Instant Throttle Response
  • Maximum Torque And Horsepower
  • For Street-Strip/RVs/Tow Vehicles
  • For Watercraft With Modified Engines

See All

Jet Performance 

Rochester Quadrajet Stage 3 Carburetor

1 Parts

Rochester Quadrajet Stage 3 Carburetor
  • Intended For Serious Street-Strip And Race Appl.
  • Oversized .149 Needle And Seat Assembly
  • Fully Modified Race Piece
  • Main Well Size Is Increased
  • Balanced To Assure Proper Top End
  • High RPM Fuel Flow
  • Extensive Circuit Modifications
  • Instant Off The Line Response

See All

Quick Fuel Technology 

Slayer Series Carburetor

8 Parts

Slayer Series Carburetor
  • 1 9/16 in. Throttle Bore Size
  • 22-66 Primary Jet
  • 22-74 Secondary Jet
  • 26-73/26-33 Idle Bleed
  • 26-31 Hi Speed Bleed
  • 21-31 Pump Nozzle
  • 25-65 Power Valve
  • 18-1 Needle And Seat
  • Gas Fuel

See All

Holley Performance 

Spreadbore Carburetor

2 Parts

Spreadbore Carburetor
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Improves Performance Over Stock Carburetor
  • All Emissions Provisions
  • Factory Preset Electric Choke For Easy Startups
  • For All Weights/Gearing/Trans For Smooth Open Of Secondaries
  • Single Feed Fuel Inlet With Filter For Easy Installation
  • Power Valve Blow-Out Protection
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Quick Fuel Technology 

SS Series Carburetor

21 Parts

SS Series Carburetor
  • 1 11/16 in. Throttle Bore Size
  • 22-70 Primary Jet
  • 22-76 Secondary Jet
  • 26-71 Idle Bleed
  • 26-31 Hi Speed Bleed
  • 21-31 Pump Nozzle
  • 25-65 Power Valve
  • 18-2 Needle And Seat
  • Gas Fuel

See All

Jet Performance 

Stage 1 Dominator Series Carburetor

2 Parts

Stage 1 Dominator Series Carburetor
  • Stage 1 Dominator Series Carburetor

See All

Jet Performance 

Stage 2 Dominator Series Carburetor

2 Parts

Stage 2 Dominator Series Carburetor
  • Stage 2 Dominator Series Carburetor

See All

Jet Performance 

Stage 3 Dominator Series Carburetor

2 Parts

Stage 3 Dominator Series Carburetor
  • Stage 3 Dominator Series Carburetor

See All

Jet Performance 

Stage 4 Dominator Series Carburetor

2 Parts

Stage 4 Dominator Series Carburetor
  • Stage 4 Dominator Series Carburetor

See All

Holley Performance 

Street Avenger Carburetor

18 Parts

Street Avenger Carburetor
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run

See All

Holley Performance 

Street HP Carburetor

10 Parts

Street HP Carburetor
  • Vibratory Polished For Good Looks
  • Optimized Calibration For Outstanding Drivability
  • Contoured Venturi Inlet Balances Airflow For Increased hp
  • Screw In Air Bleeds For Precision Tuning Capabilities
  • Two Corner Idle For Precise Idle Control
  • Quick Change Vacuum Secondaries For Use On A Range Of Vehicles
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Quick Fuel Technology 

Street Q Series Carburetor

4 Parts

Street Q Series Carburetor
  • 1 11/16 in. Throttle Bore Size
  • 22-68 Primary Jet
  • 22-76 Secondary Jet
  • 26-73 Idle Bleed
  • 26-31 Hi Speed Bleed
  • 26-33 Hi Speed Bleed
  • 25-45 Power Valve
  • 18-2 Needle And Seat
  • Gas Fuel

See All

Holley Performance 

Street Warrior Carburetor

1 Parts

Street Warrior Carburetor
  • Vibratory Polished For Good Looks
  • Performance Upgrade For Stock To Mildly Modified Vehicles
  • Calibrated For Excellent Street Performance Right Out Of The Box
  • Factory Preset Elec Choke For Easy Startups
  • For All Weights/Gearing/Trans For Smooth Open Of Secondaries
  • Single Feed Fuel Inlet For Easy Installation
  • Integrated 700R4/200R4 Transmission Kick Down Cable Mounting
  • New Rear Bowl Fuel Inlet To Allow For Dual Feed Or Custom
  • 100% Wet Flow Tested By Holley Technicians
  • Adjustable Needle & Seats To Accommodate Varying Fuel Pressures
  • Upgraded To A 1 Year Warranty

See All

Holley Performance 

Street/Strip Carburetor

4 Parts

Street/Strip Carburetor
  • Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
  • Performance Upgrade For Stock To Mildly Modified Vehicles
  • Universal Calibration For Easy Bolt-On Performance
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • Vacuum Secondaries For Use On Wide Variety Of Vehicles
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Power Valve Blow Out Protection
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
  • Compensates For All Vehicle Weights Gearing/Transmissions

See All

Holley Performance 

Supercharger Carburetor

6 Parts

Supercharger Carburetor
  • Tumble Polished Shiny Finish For Good Looks
  • Manual Choke For Precise Cold Start Control
  • Dual Accelerator Pumps For Add Fuel Under Initial Acceleration
  • Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
  • Mechanical Secondaries For Perfect Off The Line Launches
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • Boost Power Valve For Proper Enrichment Under Acceleration
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Edelbrock 

Thunder Series AVS Carburetor

11 Parts

Thunder Series AVS Carburetor
  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage

See All

Edelbrock 

Thunder Series AVS2 Carburetor

3 Parts

Thunder Series AVS2 Carburetor
  • Brings Superior Fuel Atomization
  • Annular Flow Primary Boosters
  • Fuel Distribution

See All

Holley Performance 

Track Warrior Carburetor

6 Parts

Track Warrior Carburetor
  • 100% Wet-Flow Tested And Calibrated
  • Aluminum Construction For Weight Savings
  • Optimized Race Calibrations For Outstanding Throttle Response
  • Contoured Venturi Inlet Offers Balanced Airflow For Increased HP
  • Four Corner Idle System
  • Screw In Air Bleeds For Precision Tuning Capabilities
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • Metering Blocks w/Durability/True Gasket Sealing/Adjustability
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing

See All

Holley Performance 

Tri-Power Carburetor

4 Parts

Tri-Power Carburetor
  • Electric Choke
  • Center Carburetor For SBC Tri-Power Set-Up
  • Dichromate Finish

See All

Holley Performance 

Ultra Double Pumper® Carburetor

25 Parts

Ultra Double Pumper® Carburetor
  • Metering Blocks Base Plate For Good Looks True Gasket Sealing
  • Optimized Street/Strip Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Mechanical Secondaries For Awesome Tire Turning Performance
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • Clear Fuel Level Sight Glass No Mess Fuel Level Adjustments
  • Aluminum Construction For A 43% Weight Savings
  • Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Holley Performance 

Ultra Street Avenger Carburetor

16 Parts

Ultra Street Avenger Carburetor
  • Ultra Street Avenger Has Optimized Calibration Works Out Of Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • 4 Corner Idle Allows You To Precisely Control Your Idle System
  • Built In Clear Fuel Level Sight Glass For Fuel Level Adjustment
  • Aluminum Construction For A 43% Weight Savings
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

See All

Holley Performance 

Ultra XP Carburetor

28 Parts

Ultra XP Carburetor
  • All Aluminum Construction
  • No Choke Tower For Unobstructed Airflow
  • Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
  • Down-Leg Boosters For Improved Fuel Signal
  • Contoured Hex Head Squirter Screw For Streamlined Airflow
  • Internal Pump Passage On Metering Block w/Tunable Bleed Off
  • Built In Drain Plug Provides Easy Access to Empty Bowl
  • Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
  • Clear Sight Window On Both Sides Of Bowl For Fuel Level Adjust

See All

Holley Performance 

Ultra XP Marine Carburetor

1 Parts

Ultra XP Marine Carburetor
  • Aluminum Construction
  • Saves 4.5 Pounds 38% Weight Savings
  • Has A Set Screw In The Base Plate For Wide Open Throttle Stop
  • Throttle Shafts Rides In Oil Smooth Throttle Actuation
  • Metering Blocks/True Gasket Sealing/Fully Adjustable
  • Contoured Venturi Inlet Balances Airflow For Increased hp
  • Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
  • Metering Blocks Feature Durability True Gasket Sealing
  • Idle Bypass Valve Eliminates Need For Holes In Throttle Plates
  • Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
  • Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
  • Clear Sight Windows For Easy/Safe Fuel Level Adjustments

See All

Holley Performance 

Universal Carburetor

1 Parts

Universal Carburetor
  • Universal Holley 4-Barrel Carburetor

See All

Quick Fuel Technology 

XP Series Carburetor

3 Parts

XP Series Carburetor
  • Aluminum Main Body w/Centered Venturi
  • Improved Performance/Better Air/Fuel Distribution
  • Black Anodized 2-Circuit Metering Block/Throttle Body
  • T. Body Incorporates Roller Bearings Seals For Smoother Operation
  • Anti-Siphon Check Valve In Main Body To Reduce Pump Pull-Over
  • Changeable Emulsion Bleeds/Power Valve Channel Restrictions
  • Dual Inlet Fuel Bowl w/8AN Fittings
  • Dual Sight Glass Windows For Easy Float Adjustment
  • Single Wedge Circle Track Float
  • Black Diamond Coatings For Enhanced Corrosion Protection
  • Provides 6% Reduction In Fuel Temperature

See All

Holley Performance 

Xtreme Performance Ultra XP Carburetor

1 Parts

Xtreme Performance Ultra XP Carburetor
  • Aluminum Construction - Saves 4.5 lbs. - 38% Weight Savings
  • Hard Core Gray w/Blk Billet Alum. Metering Block/Booster Inserts
  • Designed For Use On Drag Car/Circle Track/High HP Engines
  • Contoured Venturi Inlet Offers Balanced Airflow For Increased HP
  • Air Bleeds Moved Outward To Allow Smoother Transition Of Airflow
  • Metering Blocks Feature Improved Durability/True Gasket Sealing
  • Dual 50cc Accelerator Pumps Provides Perfect Amount of Fuel
  • Fuel Bowls Provide 20% More Fuel Capacity
  • Clear Sight Window On Both Sides For Easy/Safe Fuel Level Adjs.
  • 8AN Inlet Threads Offer Variety Of Plumbing Options
  • 0.150in. Stainless Needles/Seats To Control The Demand of E-85
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run!

See All