- Catalog Home
- Performance, Engine & Drivetrain
- Exhaust
- Exhaust Header
Exhaust Header
- Constructed From Thick Wall Steel
- Ceramic Coating
- Tough 3/8 in. Flange Thickness
- 14 Gauge Tubing
- 3 Bolt Flange
- Big Power Gains Across RPM Range
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Compact Design
- Easy Installation
- Tough 3/8 in. Flange Thickness
- 14 Gauge Tubing
- 3 Bolt Flange
- Durable Ceramic Coating
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Compact Design
- Easy Installation
- Tough 3/8 in. Flange Thickness
- 14 Gauge Tubing
- 5 Year Limited Warranty To Original Purchaser
- Durable Ceramic Coating
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Compact Design
- Easy Installation
- Tough 3/8 in. Flange Thickness
- 14 Gauge Tubing
- Slip Fit w/Band Clamps Attachment
- Durable Ceramic Coating
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Innovative New Design
- Increase Horsepower/Torque
- Formed From Stainless Steel
- Premium High Temp Gray Finish
- Large 3in. Secondary Collector
- Increase Scavenging
- Smooth Exhaust Pulses
- Mandrel Bent Tubes Provide Smooth Flow
- 16 Gauge Tubing Increases Strength
- Tip Tuck Design For Narrow Frame Rails
- Easy Installation
- Precision Die Cut Exhaust Port Flanges
- Leek Free Seal
- All Hardware Included
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leak-proof O-Ringed Port Seals
- Include All Mounting Hardware
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- In Testing; Produced A Max Gain Of 29 Plus Horsepower
- 37 ft. Plus Of Torque Verified By In House Dyno
- Constructed Of 1 7/8 in 16 Gauge Stainless Steel Tubing
- Incorporates 3-To-1 Mitered Collectors
- Retains Factory Sensors
- Includes 200 CPSI Catalytic Converters
- Prevents Check Engine Lights
- 48 State Legal
- Optimized Equal Tube Lengths Improve Flow/Performance
- Increase Engine Performance
- Easy to Install
- Durable
- Precision Engineered
- Limited 5 Year Warranty
- Increase Engine Performance
- Easy to Install
- Durable
- Precision Engineered
- Limited 5 Year Warranty
- Perfect Header For Vintage Lake Style Hot Rods
- Mandrel Bent Tubes Provide Smooth Flow/Increased Exhaust Velocity
- High Quality Welds
- Increased Flow
- Improves Throttle Response
- Tig Welded Machined 3/8 in. Header Flange For Leak-Free Seal
- Premium Hardware
- Direct Fit Bolt On Full Length Long Tube Exhaust Headers
- CNC Mandrel Bent 1.625in. Tubing For Maximum Exhaust Flow
- Laser Cut 3/8 in. Exhaust Header Flanges
- Significant Horsepower and Torque Increase Over Stock
- Chrome Finish
- All New Gaskets And Hardware Included
- Designed For Off-Road Race Use Only
- BBK Is Your Number One Aftermarket Performance Exhaust Brand.
- Made In The USA
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leak-proof O-Ringed Port Seals
- Include All Mounting Hardware
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- 1 5/8 in. Primary Tubes
- 2.5 in. Collector
- 304 Stainless Steel For Strength and Durability
- 3/8 in. Thick Header Flanges For A Leak-Free Seal
- Premium Gaskets and Hardware Included
- 2.5 in. Reducers w/Oxygen Sensor Bungs Included
- Mandrel Bent Tubes Provide Smooth Flow
- Heavy Duty 16 Gauge Tubing For Increased Strength/Durability
- Increased Performance
- Improves Throttle Response
- Thick Header Flange For Leak Free Seal
- Premium Hardware/Gaskets
- V-Band Flanges/Clamps Included
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leak-proof O-Ringed Port Seals
- Include All Mounting Hardware
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- Reduces Busing Deflection
- For Both Track And Street Use
- Excellent Grease Retention
- Quiet Operation
- 100% TIG Welded Construction For Optimal Strength
- Constructed Of 3 in. Mandrel Bent Stainless Steel Tubing
- 3/8 in Thick Stainless Steel Head Flanges
- Tri-Y Designed Headers w/3 in Collector
- Outlet Connection Pipes Mount to OE Mount
- V Band Flanges And Clamps Included For Leak Free Seal
- Second Bung for Wide Band O2 Gauge Auxiliary Instruments
- Reduces Busing Deflection
- For Both Track And Street Use
- Excellent Grease Retention
- Quiet Operation
- 100% TIG Welded Construction For Optimal Strength
- Constructed Of 3 in. Mandrel Bent Stainless Steel Tubing
- 3/8 in Thick Stainless Steel Head Flanges
- Tri-Y Designed Headers w/3 in Collector
- Outlet Connection Pipes Mount to OE Mount
- V Band Flanges And Clamps Included For Leak Free Seal
- Second Bung for Wide Band O2 Gauge Auxiliary Instruments
- Reduces Busing Deflection
- For Both Track And Street Use
- Excellent Grease Retention
- Quiet Operation
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- Produces An Astonishing 12 HP And 16 ft./lbs. Of Torque
- Constructed Using 1.625 16-Gauge Tubing For Unrestricted Flow
- 100% Hand Welded For Optimal Strength And Durability
- Eliminates Dead Space That Can Cause Turbulence And Hinder Flow
- Mitered Collectors Decrease Turbulence And Increase Exhaust Flow
- 3/8in Thick CNC Machined Flanges To Ensure A Leak Free Seal
- Smooth Curves And Increased Dia. Improve Performance And Flow
- Retains All Your Factory Sensors For A Hassle Free Installation
- This Is A Race Only Product Used Solely For Competition
- Constructed Of 1 7/8 in 16 Gauge Stainless Steel Tubing
- 100% TIG Welded
- Incorporates 3-To-1 Mitered Collectors
- Retains Factory Sensors
- Optimized Equal Tube Lengths Improve Flow/Performance
- Mandrel Bent Tubing For Unrestricted Flow
- 4-to-1 Formed Merge Collectors
- Optimized Tube Lengths Improve Flow And Performance
- 100 Percent Hand MIG Welded Construction
- 3/8 In. Laser Cut Flanges
- Hassle Free Installation
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Mitered Collectors
- 14 Gauge Thick Stainless Steel Tubing
- Increases Flow And Performance
- Direct Bolt On
- Factory Mounting Locations
- No Modification Necessary
- 300 Cell High-Flow Catalytic Converters
- 3 To 3.5 in. Transition
- 2 Year Warranty
- Added 67 HP/ 171 ft. lbs. Torque
- Thick Laser Cut Flanges
- 100 Percent TIG Welded
- Optimized Tube Lengths
- Includes Nuts Bolts Dip Stick for Clearance
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Mitered Collectors
- 14 Gauge Thick Stainless Steel Tubing
- Increases Flow And Performance
- Direct Bolt-On
- Factory Mounting Locations
- No Modification Necessary
- 409 Stainless Steel
- 3 in. To 3.5 in. Mandrel Bent Tubing
- 2 Year Warranty
- Plus 25hp / 26 ft. lbs. Torque
- 304 Stainless Steel
- 100 Percent MIG Welded
- Race Version for Race Performance
- 3/8 in Thick Header Flanges
- Twisted Steel Long Tube Headers
- Y-Pipe w/Mitered Merge Collector
- Stainless Steel Tubing For Better Flow and Added Power
- Mandrel Bent Tubing For Unrestricted Flow
- 4-to-1 Formed Merge Collectors
- Optimized Tube Lengths Improve Flow And Performance
- 100% Hand MIG Welded Construction
- 3/8 In. Laser Cut Flanges
- Hassle Free Installation
- Factory Mounting Locations
- Formed Collectors
- Optimized Tube Lengths
- 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
- Accepts Lift Kits That Interfere w/The OE Loop
- Accepts Stock Y-Pipe Or Mach Force XP Y-Pipe
- Cutting Is Required
- Includes All Necessary Hardware
- 4-2-1 Tri-Y Designed Headers
- Includes Dual Hi-Flow Stainless Steel Catalytic Converters
- Includes V-Band Flanges And Clamps For A Secure Leak-Free Seal
- Incorporates An X-Pipe To Evenly Balance Exhaust Flow
- Offers A Second Bung For Wide-Band O2 Gauge Or Auxiliary Devices
- This Is A Direct Bolt On System When Used w/Age P/N:49-34068
- Will Also Work w/Stock Exhaust System w/Minor Modifications
- Universal Turbo Headers For Small Block Chevy Engines
- Available w/1-3/4 in. Mandrel Bent Primary Tubes
- 2.50 in. Collectors w/Merge Spears For Increased Exhaust Velocity
- 3/8 in. Thick Header Flanges For A Leak-Free Seal
- 2.50 in. V-Band Flanges And Clamps
- Premium Header Gaskets and Bolts Included
- Available In Natural 304 Stainless Steel
- Designed For Up And Forward/Down And Forward/Down And Back
- Stainless Steel Construction
- Ball And Socket Collector Connections
- Gasketless Leak Free Ball Flange Connections
- Dyno Tuned for Maximum Performance
- High Temperature Ceramic Coated
- Ceramic Coated For Ultimate Protection
- Improve Performance/Throttle Response
- Engineered For Easy At Home Installation
- 1 Year Warranty
- Premium Flowmaster Quality
- Stainless Steel Construction
- 50 State Emissions Certified
- Dyno Tuned for Maximum Performance
- High Temperature Ceramic Coated
- 3/8 in. Thick Laser Cut Flanges
- Block Hugger Shorty Header
- Engineered For Maximum Efficiency
- Provides Exceptional Performance
- Ceramic Coated For Long Lasting Performance/Appearance
- 1 Year Warranty
- Premium Flowmaster Quality
- Compact Design
- Easy Installation
- Durable Ceramic Coating
- 14 Gauge Tubing
- Factory Flange Connection
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Direct Replacement Bolt On Performance Exhaust Headers
- Dyno Tested For Maximum Performance
- Bolt On 10-15 Horsepower Plus
- 1.625 in. CNC Mandrel-Bent 16 Gauge Tubing For Max. Exhaust Flow
- Precision Laser Cut 3/8 One Piece Flanges
- Chrome Finish
- Pressure Tested For Leak Free Performance
- New Gaskets And Hardware Included
- BBK Is Your Number One Aftermarket Performance Exhaust Brand.
- Designed and Manufactured in USA
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leak-proof O-Ringed Port Seals
- Include All Mounting Hardware
- Direct Replacement Bolt On Performance Exhaust Headers
- Dyno Tested For Maximum Performance
- Bolt On 10-15 Horsepower Plus
- 1.75 in. CNC Mandrel-Bent 16 Gauge Tubing For Max. Exhaust Flow
- Precision Laser Cut 3/8 One Piece Flanges
- Chrome Finish
- Pressure Tested For Leak Free Performance
- New Gaskets And Hardware Included
- BBK Is Your Number One Aftermarket Performance Exhaust Brand
- Made In The USA
- Mandrel Bent 409 Stainless Steel For Smooth Flow
- 16 Gauge Tubing Increases Strength
- Increased Throttle Response
- Increased Performance
- TIG Welded Collector
- Leak Free Seal
- Premium Hardware
- 16-Gauge Tubing For Durability
- Leak Free Seal
- Designed For Direct Fit With OEM Exhaust Manifolds
- Will Accommodate All Emission Control Devices
- Premium Hardware/Gaskets
- Shorty Tuned Length Exhaust Header
- Direct Replacement Bolt On Performance Exhaust Headers
- Dyno Tested For Maximum Performance
- Bolt On 10-15 Horsepower Plus
- 1.625 in. CNC Mandrel-Bent 16 Gauge Tubing For Max. Exhaust Flow
- Precision Laser Cut 3/8 One Piece Flanges
- Chrome Finish
- Pressure Tested For Leak Free Performance
- New Gaskets And Hardware Included
- BBK Is Your Number One Aftermarket Performance Exhaust Brand
- Made In The USA
- Direct Fit Bolt On Replacement Headers
- Bolt On 10-15 Horsepower Plus
- CNC Mandrel-Bent 1-5/8 Tubing For Unrestrictive Exhaust Flow
- Precision Laser Cut 3/8 One Piece Flanges
- New Gaskets And Hardware Included
- Chrome Finish
- BBK Is Your Number One Aftermarket Performance Exhaust Brand.
- Designed and Manufactured in USA
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- Manufactured In The USA
- Kooks Uses T304 Aircraft Quality Stainless Steel
- Race Tested And Designed For Maximum Power
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leak-proof O-Ringed Port Seals
- Include All Mounting Hardware
- Includes 6 Header O-Ring Gaskets
- Laser Cut Flanges
- Dual High Flow 300 Cell Semi-Metallic Catalytic Converters
- Mitered Collector
- 304 Stainless Steel Tubing
- 100% Hand TIG Welded
- Factory Mounting Locations
- Retains Factory Style O2 Sensors
- Uses OE Style O2 Bungs
- No Modifications Necessary
- 2 Year Limited Warranty
- Mandrel Bent Tubing For Unrestricted Flow
- 4-to-1 Formed Merge Collectors
- Optimized Tube Lengths Improve Flow And Performance
- 100 Percent MIG Welded Construction
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Street Series Twisted Steel Header And Connection Pipe
- Replaces Restrictive Cast-Iron Stock Manifold
- Retains Factory Sensors
- Stainless Steel Tubing
- 49 State Legal Catalytic Converter
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Twisted Steel Long Tube Headers
- Y-Pipe w/Mitered Merge Collector
- Stainless Steel Tubing For Better Flow and Added Power
- Constructed Out Of 16-Gauge 1-3/4 in. Mandrel-Bent 409 SS Tubing
- Optimized Tube Lengths Improve Flow And Performance
- 100% Hand MIG-Welded For Strength and Durability
- Factory Mounting Locations
- Formed Collectors
- Optimized Tube Lengths
- 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
- Accepts Lift Kits That Interfere w/The OE Loop
- Accepts Stock Y-Pipe Or Mach Force XP Y-Pipe
- Cutting Is Required
- Includes All Necessary Hardware
- 4-2-1 Tri-Y Designed Headers
- Includes Dual Hi-Flow Stainless Steel Catalytic Converters
- Includes V-Band Flanges And Clamps For A Secure Leak-Free Seal
- Incorporates An X-Pipe To Evenly Balance Exhaust Flow
- Offers A Second Bung For Wide-Band O? Gauge Or Auxiliary Devices
- This Is A Direct Bolt On System When Used w/Age P/N:49-34068
- Will Also Work w/Stock Exhaust System w/Minor Modifications
- This Item Is Not CARB Exempt And Isnt Legal For Purchase In CA
- 100 Percent Manufactured In The USA
- Kooks Headers And Exhaust Make The Most Power In The Industry
- Kooks Products Are Made Of T304 Air Craft Quality Steel
- Kooks System Are Specifically Designed For Maximum Power
- Limited Lifetime Warranty To Original Purchaser
- Every Kooks Product Is Dyno And Race Tested
- Kooks Products Fit And Install The Best
- 3 Generations Being Family Owned And Operated
- Compact Design
- Easy Installation
- Durable Ceramic Coating
- 14 Gauge Tubing
- Slip-Fit Attachment
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Ideal For Street Rods
- Mandrel Bent Tubes Provide Smooth Flow/Increased Exhaust Velocity
- 16 Gauge Tubing Increases Strength
- Increases Performance
- Improves Throttle Response
- TIG Welded
- Leak Free Seal
- Premium Hardware/Gaskets
- Adapter Tubes Supplied For Easy Connection
- Maximum Torque and HP Boost
- Durable Ceramic Coating
- Super Tough 3/8 in. Flange Thickness
- 14 Gauge Tubing
- 3 Bolt Flange Attachment
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Mandrel-Bent Tubes
- Heavy Duty Tubing
- 3/8 in. Header Flange
- Premium Hardware Included
- Maximum Torque and HP Boost
- Durable Ceramic Coating
- Super Tough 3/8 in. Flange Thickness
- 14 Gauge Tubing
- 3 Bolt Flange Attachment
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- Universal Forward Facing
- 1 5/8 in. Mandrel Bent Primary Tubes
- 2 1/2 in. Collectors w/Merge Spears
- For Increased Exhaust Velocity
- 7/16 in. Thick Header Flanges For A Leak-Free Seal
- 2 1/2 in. V-Band Flanges and Clamps Included
- Mandrel Bent 304 Stainless Steel Tubing
- 3/8 in. Thick Head Flanges
- Compatible w/Factory Down-Pipes For Easy Install
- 100% MIG Welded
- Stainless Steel Tubing w/0.120 Wall
- Heavy Duty 2 in. Flex Tubing w/Inner Liner Improves Air Flow
- 3/8 in. Thick Laser Cut Flanges For a Leak-Free Seal
- TIG Welded Construction
- Retains All OE Emission Components
- Optimized Primary Tube Lengths
- CNC Mandrel Bends
- Pulse Control Technology
- Limited Lifetime Warranty
- Factory Mounting Locations
- Formed Collectors
- Ball Socket Connections
- Optimized Tube Lengths
- Twisted Steel Shorty Header
- Compact Design
- Easy Installation
- Durable Ceramic Coating
- 14 Gauge Tubing
- Factory Flange Connection
- Limited Lifetime Warranty To Original Purchaser
- Made in the U.S.A.
- CNC Mandrel Bent Tubes
- 409 Stainless Steel Increased Durability
- Extra Thick Flange For Leak Free Seal
- Increased Exhaust Flow
- Improves Throttle Response
- Welded-In Merge Collector